How do you install the serpentine belt on a 1998 Ford zx2?
Answer
There will be a tensionor pully, that is a pulley that is connected to
an arm that is spring loaded in order to produce tension on your belt. By releasing
tension on this pully, you can remove the belt. The pulley will have a way
to do this using hand tools. Most have either a bolt head you can grip with
a pry bar and the appropriate size socket, some have a square hole where the socket
- drive pry bar will fit directly, but the age old plain pry bar can be used
by itself to release the tension. This should be done with two people if possible,
one to release the tension while the other removes the belt...
|
